Page 1 of 1
Pls guide for Nehru place
Posted: Tue May 06, 2014 11:26 pm
by mats
Hi friends
Need to buy mean well drivers for LEDs at Nehru place. Could someone pls give me addresses where to buy the right stuff there as I don't know my way through Nehru place
Regards
Kuldip
Re: Pls guide for Nehru place
Posted: Wed May 07, 2014 11:22 am
by parthapratim22
Nehru Place(South Delhi) is landmark, you can reach from any place from Delhi.
Inside Nehru place u just have to search for the perfect shop.
Re: Pls guide for Nehru place
Posted: Wed May 07, 2014 4:56 pm
by GauravSingh
Digital Promoters (India) Pvt. Ltd.
502 & 505, Vishal Bhawan,
95, Nehru Place,
New Delhi - 110 019
011 4700 3900
Re: Pls guide for Nehru place
Posted: Thu May 08, 2014 8:42 am
by mats
Thank you gaurav
It will make it much easier to find a needle in the hay stack if we know where exactly to look for it.
Could you also guide me as to the costing for 3watt led drivers and if approx 5 x 3watt LEDs could run together ?
Warm regards
Re: Pls guide for Nehru place
Posted: Thu May 08, 2014 10:43 am
by GauravSingh
Hi Kuldip,
What is the max drive current of your led? Assuming it's rated at 1500mA, then you can go for LPC 35-700 or LPC 35-1050. You can run 10 x 3 watt LEDs with these drivers. LPC 35-1050 costed me around Rs 1450/-. These drivers don't have the dimming function.
Kindly check the availability of the drivers with them on phone before going, sometimes they don't have it in stock.
Re: Pls guide for Nehru place
Posted: Thu May 08, 2014 10:43 pm
by mats
Hi gaurav
All I know is that I have 3 watt LEDs Edison.
Could you please guide how to go about it ?
Regards
Re: Pls guide for Nehru place
Posted: Thu May 08, 2014 11:23 pm
by sushant
mats wrote:Hi gaurav
All I know is that I have 3 watt LEDs Edison.
Could you please guide how to go about it ?
Regards
edison 3W LEDs are rated at 700mA
i guess gaurav have Cree or Harvatech Leds thay are rated at 1500mA
you can use the above mentioned drivers for 2 strings of 10*3W in parallel, thus delivering around 750mA in both strings(rough calculation,20 Leds in total. peak current for Edison is 1A so that would work fine.)