Pumps

Discuss about equipments required in marine setups.
Abhi
Promising Star of AquaPetZ!
Promising Star of AquaPetZ!
Posts: 2209
Joined: Sun Oct 16, 2011 6:28 am
Location: Gurgaon

Re: Pumps

Unread postby Abhi » Tue Oct 02, 2012 9:22 am

jack wrote:
Abhi wrote:Ehiem definetly. 8-10 times only ? i would suggest go even more.



Even more ?? Mow much ?? Bro at the moment i am talking about the pump to be used in my sunp...... Rest of the flow can be achieved woth wavemakers..... But do i require more than 2-4 times the turnover rate from sump to tank in filteration ?


Yes Bro was refering to the sump turn over only. Minimum go for 10 times.


MTS: Multiple tank syndrome !

jack
Moderator
Moderator
Posts: 2562
Joined: Mon Oct 17, 2011 4:28 pm
Location: Ahmedabad

Re: Pumps

Unread postby jack » Tue Oct 02, 2012 9:37 am

Abhi wrote:
jack wrote:
Abhi wrote:Ehiem definetly. 8-10 times only ? i would suggest go even more.



Even more ?? Mow much ?? Bro at the moment i am talking about the pump to be used in my sunp...... Rest of the flow can be achieved woth wavemakers..... But do i require more than 2-4 times the turnover rate from sump to tank in filteration ?


Yes Bro was refering to the sump turn over only. Minimum go for 10 times.



ittt would be difficult :( coz the plumbing pipes i have set is of 1 inch, soo not sure how the water will be drained out. soo this ll be experiment then.
Finally i am Broke but Happy :D

Abhi
Promising Star of AquaPetZ!
Promising Star of AquaPetZ!
Posts: 2209
Joined: Sun Oct 16, 2011 6:28 am
Location: Gurgaon

Re: Pumps

Unread postby Abhi » Tue Oct 02, 2012 10:45 am

jack wrote:
Abhi wrote:
jack wrote:
Abhi wrote:Ehiem definetly. 8-10 times only ? i would suggest go even more.



Even more ?? Mow much ?? Bro at the moment i am talking about the pump to be used in my sunp...... Rest of the flow can be achieved woth wavemakers..... But do i require more than 2-4 times the turnover rate from sump to tank in filteration ?


Yes Bro was refering to the sump turn over only. Minimum go for 10 times.



ittt would be difficult :( coz the plumbing pipes i have set is of 1 inch, soo not sure how the water will be drained out. soo this ll be experiment then.


That will be a trial and error then
MTS: Multiple tank syndrome !

jack
Moderator
Moderator
Posts: 2562
Joined: Mon Oct 17, 2011 4:28 pm
Location: Ahmedabad

Re: Pumps

Unread postby jack » Tue Oct 02, 2012 11:31 am

Abhi wrote:
jack wrote:
Abhi wrote:
jack wrote:
Abhi wrote:Ehiem definetly. 8-10 times only ? i would suggest go even more.



Even more ?? Mow much ?? Bro at the moment i am talking about the pump to be used in my sunp...... Rest of the flow can be achieved woth wavemakers..... But do i require more than 2-4 times the turnover rate from sump to tank in filteration ?


Yes Bro was refering to the sump turn over only. Minimum go for 10 times.



ittt would be difficult :( coz the plumbing pipes i have set is of 1 inch, soo not sure how the water will be drained out. soo this ll be experiment then.


That will be a trial and error then



yups it ll be
Finally i am Broke but Happy :D

Abhi
Promising Star of AquaPetZ!
Promising Star of AquaPetZ!
Posts: 2209
Joined: Sun Oct 16, 2011 6:28 am
Location: Gurgaon

Re: Pumps

Unread postby Abhi » Mon Oct 15, 2012 11:22 am

Anyupdate on this? Which one did you pick up?
MTS: Multiple tank syndrome !

jack
Moderator
Moderator
Posts: 2562
Joined: Mon Oct 17, 2011 4:28 pm
Location: Ahmedabad

Re: Pumps

Unread postby jack » Mon Oct 15, 2012 12:52 pm

i picked up 3 chinese pumps

1 with capacity of 5,000 LPH
2 with capacity of 4,000 LPH
Finally i am Broke but Happy :D