bcube wrote:2. Now tape the edges of glass so that extra silicon may be removed later.
Rajivji, please explain, I didn't understand in which manner tape has to be adhered to remove excess silicon later
Suppose you are using a 8 mm glass to make the aquarium. Now the tape should be fixed more than 8 mm away from the edge of the glass. Check the photograph and look up the edges of glass.
SCORPIO wrote:
Suppose you are using a 8 mm glass to make the aquarium. Now the tape should be fixed more than 8 mm away from the edge of the glass. Check the photograph and look up the edges of glass.
as usual silly doubt
if 8mm glass edge lies on other glass phase, then how will you apply silicon because only tape will be there after 8mm.
So you mean 16mm on one side and 8mm on other? I ask so becase I read something like this and made a beautiful mistake
nut cases ratt
brainless growl
rest you dont understand, and thats where you read/think TWICE before you post!!
SCORPIO wrote:
Suppose you are using a 8 mm glass to make the aquarium. Now the tape should be fixed more than 8 mm away from the edge of the glass. Check the photograph and look up the edges of glass.
as usual silly doubt
if 8mm glass edge lies on other glass phase, then how will you apply silicon because only tape will be there after 8mm.
So you mean 16mm on one side and 8mm on other? I ask so becase I read something like this and made a beautiful mistake
Please see this picture:
glass.jpg
You do not have the required permissions to view the files attached to this post.
“Take up one idea. Make that one idea your life - think of it, dream of it, live on that idea. This is the way to success.”